Adjustable Bayonet Thermocouple
Can we help?
Full Product Specification
| Sensor | Type J or K |
| Lead | Braided Stainless Steel |
| Lead Length | 2 meters |
| Adaptor Thread | 1/8" BSP |
Recommended Products
Brearley Mineral Insulated Thermocouples
Brearley Mineral Insulated Thermocouples are metal sheathed cables with thermocouple conductors which are insulated from each other and the sheath by highly compacted magnesium oxide.
Conductors are safe from environmental contamination, ductile and highly responsive.
The cables are water, oil and gas resistant, extremely robust and are eminently suitable for applications where high or low temperature, corrosion, vibration, pressure and other extreme conditions exist.
Brealey Mineral Insulated Thermocouples can be designed and tested to comply with the requirements of AMS 2750D and NADCAP.
Data Recorder
As a technical partner of Eurotherm Systems®, RM&C can offer a wide range of process controlling and recording instrumentation. Whatever your application, call one of our technical sales specialists for advice on which unit or complete system would best suit your requirements.
Temperature Calibration
Either on-site or in-house, RM&C's Calibration Engineers can provide calibration services to either UKAS or traceable standards. RM&C has one of the widest ranged calibration facilities in the UK with our temperature calibration capability ranging from -196 °C to 2,200 °C.
Typical instruments covered include:
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.
Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
Brearley Mineral Insulated Thermocouples
Brearley Mineral Insulated Thermocouples are metal sheathed cables with thermocouple conductors which are insulated from each other and the sheath by highly compacted magnesium oxide. Conductors are safe from environmental contamination, ductile and highly responsive.
The cables are water, oil and gas resistant, extremely robust and are eminently suitable for applications where high or low temperature, corrosion, vibration, pressure and other extreme conditions exist.
Brealey Mineral Insulated Thermocouples can be designed and tested to comply with the requirements of AMS 2750D and NADCAP.
Data Recorder
As a technical partner of Eurotherm Systems®, RM&C can offer a wide range of process controlling and recording instrumentation. Whatever your application, call one of our technical sales specialists for advice on which unit or complete system would best suit your requirements.- Process controllers and indicators
- Graphic recorders
- Stand alone or network solutions
- SCADA and data acquisition packages
- Small/large frame paper recorders
- Complete system solutions
Temperature Calibration
Either on-site or in-house, RM&C's Calibration Engineers can provide calibration services to either UKAS or traceable standards. RM&C has one of the widest ranged calibration facilities in the UK with our temperature calibration capability ranging from -196 °C to 2,200 °C.Typical instruments covered include:
- Thermocouples of all types
- Platinum resistance thermometers
- Disappearing filament pyrometers
- Infrared pyrometers
- Liquid in glass thermometers
- Data recorders with external probes
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
