Digital / Analogue Mass Gas Flowmeter
Can we help?
The M series mass flowmeter was designed to be used as a stand-alone device. With the native display, a user can easily change the configuration of the meter without the need for computers, complicated software or scripts. The M series mass flowmeter also measures pressure, temperature and volumetric flow in addition to mass flow.
MS Series - Aggressive Gases
The MS series of 316L Stainless Steel aggresive gas compatible mass flowmeters retain the same functionality as well as fit and finish of the standard M series mass flowmeters.
The MS series is built from 316L Stainless Steel and uses encapsulated 316L Stainless Steel sensors in the flow path. A variety of sealing material are available, including FFKM, EPDM, Viton, Buna-n, etc. depending upon your application and needs.
FEATURES
- Response time of 10 milliseconds (adjustable)
- Turndown ration of 100:1
- Push button interface
- Accuracy of ±0.8% of reading + 0.2% of full scale
- 30 standard gas calibration included
- Mass flow
- Volumetric flow
- Pressure (psia)
- Temperature (ºC)
Full Product Specification
| Flow Range | 0.5 cm³/min - 1,500 L/min (@ ATP) |
| Accuracy*¹ | ±0.8% of reading + 0.2% of full scale |
| Repeatability | ±0.2% FS |
| Adjustable Response Time | 10 ms |
| Turndown Ratio | 100:1 |
| Pressure Drop | 1.0 psid @ 0.5-50 cm³/min 5.5 psid @ 500 L/min 6.0 psid @ 1,000 L/min 9.0 psid @ 1,500 L/min 5.0 psid @ 2,000 L/min |
| Maximum Pressure | 145 psig |
| Operating Temperature | -10 to 50ºC |
| Wetted Materials | Aluminium, 303 and 302 Stainless Steel, Viton®, Silicon Rubber and Glass Reinforced Nylon |
| Power Supply | 7-30V DC, 30mA typical |
| Output | 0-5V DC (4-20mA or 0-10V DC optional) |
| Electrical Connection | 8 pin mini-DIN or DB-15 |
| 30 gas calibrations included: acetylene, air, argon, butane, carbon dioxide, carbon monoxide, ethane, ethylene, helistar® A1025, helium, hydrogen, iso-butane, krypton, methane, neon, nitric oxide, nitrogen, nitrous oxide, oxygen, propane, stargon® CS, sulphur hexafluoride, xenon, 75% argon + 25% CO₂, 90% argon + 10% CO₂, 92% argon + 8% CO₂, 98% argon + 2% CO₂, 75% argon + 25% helium, 95% argon + 5% methane, 75% helium + 25% argon, 75% CO₂ + 25% argon. | |
| Corrosive/Aggressive gases compatible with MS series: nitric oxide (to 100%), nitrogen triflouride (to 100%), ammonia (to 100%), chlorine (to 100%), hydrogen sulfide (to 100%), sulfur dioxide (to 100%), propylene (to 100%), nitrogen dioxide (to 0.5% in an inert carrier), refrigerant gases (to 100%). | |
Recommended Products
Instrumentation Supply and Calibration
As a leading manufacturer of a wide variety of measurement instrumentation, RM&C is ideally placed to offer a complete care package to our customers. From initial product design to customer specifications followed by in-house manufacture and production, to either in-house or on-site calibration, let RM&C guide you through.
As well as our own manufactured products RM&C also have a number of agency agreements with leading instrument manufacturers in addition to being technical partner with Eurotherm Controls. This ensures our ability to offer a genuine 'one-stop-shop' for all our customers' pyrometry requirements.
One of our most highly demanded services is the supply of thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to our customer's specified usage.
Whatever the required usage, RM&C has the perfect product to cover a wide range of applications, including:
Instrument Service and Repair
RM&C also offers a repair service for any of our own manufactured equipment (which includes Platon, Sensit and Brearley products). Let RM&C support you with our expertise in instrumentation repair, service and certification. With a team of experienced OEM trained Engineers and fully equipped workshops we can offer an unrivalled service for all your instrumentation support requirements. With our four UKAS accredited laboratories for Flow, Pressure, Temperature and Electrical calibration your instrument can be fully certified and ready to perform on its return.
UKAS Calibration
If you would like further specific information about our UKAS accreditation then please download our latest UKAS Schedule of Accreditation here.
On-Site Services
RM&C's team of experienced on-site engineers cover the full spectrum of industry sectors and hold accreditation for the on-site calibration of equipment to either UKAS or traceable standards.
Our UKAS calibration capabilities include:
Our traceable calibration to national standards include:
Platon LG/NG Glass Variable Area Flowmeters
PLATON GAPMETER TYPES LG/NG
Flow up the tapered tube lifts the float to an equilibrium position.Flow rate is then measured against the flat top edge of the float.
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.
Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
Instrumentation Supply and Calibration
As a leading manufacturer of a wide variety of measurement instrumentation, RM&C is ideally placed to offer a complete care package to our customers. From initial product design to customer specifications followed by in-house manufacture and production, to either in-house or on-site calibration, let RM&C guide you through. As well as our own manufactured products RM&C also have a number of agency agreements with leading instrument manufacturers in addition to being technical partner with Eurotherm Controls. This ensures our ability to offer a genuine 'one-stop-shop' for all our customers' pyrometry requirements.
One of our most highly demanded services is the supply of thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to our customer's specified usage.
Whatever the required usage, RM&C has the perfect product to cover a wide range of applications, including:
- Secondary Standards
- TUS (Temperature Uniformity Survey)
- SAT (System Accuracy Test)
- Control, recording and monitoring
- Load
Instrument Service and Repair
RM&C also offers a repair service for any of our own manufactured equipment (which includes Platon, Sensit and Brearley products). Let RM&C support you with our expertise in instrumentation repair, service and certification. With a team of experienced OEM trained Engineers and fully equipped workshops we can offer an unrivalled service for all your instrumentation support requirements. With our four UKAS accredited laboratories for Flow, Pressure, Temperature and Electrical calibration your instrument can be fully certified and ready to perform on its return.
UKAS Calibration
If you would like further specific information about our UKAS accreditation then please download our latest UKAS Schedule of Accreditation here.
On-Site Services
RM&C's team of experienced on-site engineers cover the full spectrum of industry sectors and hold accreditation for the on-site calibration of equipment to either UKAS or traceable standards. Our UKAS calibration capabilities include:
- Any thermocouple type
- All analogue or digital display instruments
- Any furnace, oven, incubator, cold room or freezer – surveyed to all standard and most individual specifications including RPS 953 (version 14) and AMS 2750D specifications.
- Autoclaves and media preparators validated to prove heat penetration and distribution.
Our traceable calibration to national standards include:
- All process control instrumentation
- Pressure gauges and transducers
- Dimensional calibration of mechanical measuring equipment
- Weighing scales
Platon LG/NG Glass Variable Area Flowmeters
PLATON GAPMETER TYPES LG/NG- Easy to Use, high visibility scale
- Simple and reliable
- Gas or Liquid flow measurement
- Operator confidence from float rotation
- Instantaneous response
- Accuracy up to ±1.25% FSD
- Air flow range 5mL/min to 150L/min
- Linear scales, typically 10:1 range
- Scales 100mm or 30mm long
- Glass tube removal without tools
- Alarm Option - ATEX Infrared Alarm Option
- Standard or custom scaled glass tubes to suit process fluids and conditions
- Wide range of process connections to fit pipe-work requirements
- Brass or stainless steel end blocks with optional flow control valve
- Supplied with studs for surface panel mounting
Flow up the tapered tube lifts the float to an equilibrium position.Flow rate is then measured against the flat top edge of the float.
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
