Sensit OEM Pressure Sensor 34mm, 19mm & 15mm
Can we help?
The OEM pressure sensor is a low cost pressure sensor available in standard ranges from 100mbar to 600bar. All ranges are available in gauge or absolute format. It is ideal for continuous use in applications where the pressure medium is wet and corrosive and long term stability is of prime importance.
The OEM pressure sensor is manufactured from high purity alumina ceramics. This material possesses superb chemical and abrasion resistance, making it unrivalled for use with virtually any pressure medium.
The diaphragm of the sensing element has a fouractive- armstrain gauge bridge fused to its inner face. This direct fusion ensures excellent long term stability and repeatability, which, coupled with the matched bridge network, provides excellent linear thermal characteristics.
FEATURES
The OEM pressure sensor is manufactured from high purity alumina ceramics. This material possesses superb chemical and abrasion resistance, making it unrivalled for use with virtually any pressure medium.
The diaphragm of the sensing element has a fouractive- armstrain gauge bridge fused to its inner face. This direct fusion ensures excellent long term stability and repeatability, which, coupled with the matched bridge network, provides excellent linear thermal characteristics.
FEATURES
- Superb chemical and corrosion resistance
- High output
- High bridge resistance
- Excellent linearity
- Low cost
- Low supply current
- High electrical isolation
- Excellent long term stability
- Small size
- Bridge balanced at zero applied pressure
Full Product Specification
P34X (34mm dia) OEM CERAMIC SENSOR| Sensor range (bar) | 0.5 | 1.0 | 2.0 | 5.0 | 10 | 20 | 50 | 100 | 200 | 350 | 500 | 700 | |
| Thickness (mm normal) | 7.3 | 7.3 | 7.3 | 7.4 | 7.4 | 7.8 | 8.3 | 8.3 | 8.3 | 9.0 | 9.5 | 10.0 | |
| Sensitivity mV/V ±30% | 2.5 | 3.5 | 4.5 | 6.5 | 7.0 | 8.0 | 7.5 | 10.0 | 8.5 | 7.0 | 6.5 | 9.0 | |
| Burst pressure | 3X sensor range minimum | ||||||||||||
| Sensor diameter | 33.70mm - 34.35mm | ||||||||||||
| Supply Voltage | 1 - 30Vdc | ||||||||||||
| Operating Temperature | -25°C to +125°C | ||||||||||||
| NL&H (%FRO.BSL) | <±0.25 (<±0.1 available) | ||||||||||||
| TZS (%FRO/°C) | <±0.04% typical | ||||||||||||
| TSS (%FRO/°C) | <-0.04 typical | ||||||||||||
| Zero output laser trim | <±0.2mV/V | ||||||||||||
| Bridge resistance | 10K ±30% | ||||||||||||
| Long Term Stability | <±0.1%/y@25°C | ||||||||||||
| Material | 96% AL2 O3 ceramics | ||||||||||||
P19X (19mm dia) OEM CERAMIC SENSOR
| Sensor range (bar) | 0.1 | 0.4 | 1.0 | 2.0 | 3 | 5 | 10 | 20 | 50 | 100 | 200 | 400 | 600 |
| Thickness (mm normal) | 6.2 | 6.2 | 6.2 | 6.3 | 6.4 | 6.4 | 6.5 | 6.6 | 6.8 | 7.3 | 7.8 | 8.6 | 9.5 |
| Sensitivity mV/V ±30% | 0.9 | 2.2 | 3.0 | 3.0 | 3.0 | 3.5 | 4.0 | 5.0 | 4.5 | 4.0 | 5.0 | 4.0 | 3.0 |
| Burst pressure | 3X sensor range minimum | ||||||||||||
| Sensor diameter | 18.60mm - 19.00mm | ||||||||||||
| Supply Voltage | 1 - 30Vdc | ||||||||||||
| Operating Temperature | -25°C to +125°C | ||||||||||||
| NL&H (%FRO.BSL) | <±0.25 (<±0.1 available) | ||||||||||||
| TZS (%FRO/°C) | <±0.04% typical | ||||||||||||
| TSS (%FRO/°C) | <-0.04 typical | ||||||||||||
| Zero output laser trim | <±0.2mV/V | ||||||||||||
| Bridge resistance | 10K ±30% | ||||||||||||
| Long Term Stability | <±0.1%/y@25°C | ||||||||||||
| Material | 96% AL2 O3 ceramics | ||||||||||||
P15X (15mm dia) OEM CERAMIC SENSOR
| Sensor range (bar) | 0.4 | 1.0 | 2.0 | 3.0 | 4 | 5 | 10 | 20 | 50 | 150 | 200 | ||
| Thickness (mm normal) | 6.20 | 6.20 | 6.26 | 6.26 | 6.31 | 6.31 | 6.38 | 6.49 | 6.49 | 7.06 | 7.28 | ||
| Sensitivity mV/V ±30% | 1.3 | 3.7 | 2.8 | 4.3 | 3.4 | 4.2 | 4.5 | 4.8 | 6.4 | 5.4 | 5.4 | ||
| Burst pressure | 3X sensor range minimum | ||||||||||||
| Sensor diameter | 14.80mm - 15.00mm | ||||||||||||
| Supply Voltage | 1 - 30Vdc | ||||||||||||
| Operating Temperature | -25°C to +125°C | ||||||||||||
| NL&H (%FRO.BSL) | <±0.25 (<±0.1 available) | ||||||||||||
| TZS (%FRO/°C) | <±0.07 | ||||||||||||
| TSS (%FRO/°C) | <-0.04 typical | ||||||||||||
| Zero output laser trim | <±0.2mV/V | ||||||||||||
| Bridge resistance | 10K ±30% | ||||||||||||
| Long Term Stability | <±0.1%/y@25°C | ||||||||||||
| Material | 96% AL2 O3 ceramic | ||||||||||||
Recommended Products
Sensit HPS - C Series Passive mV Output Pressure Transducer
Four wire, ratiometric, passive mV output transducers offering superb chemical and corrosion resistance. Gauge or Absolute pressure is detected using a four active arm strain gauge bridge sensor, fused to a high-purity ceramic diaphragm. Available in three classes of accuracy and stability specified below, with ranges from 100mbar to 600 bar or scaled to customer requirements.
Sensit HPS-A Series 4-20mA Output Pressure Transmitter
Two wire, 4-20mA output transmitters offering superb chemical and corrosion resistance. Gauge or Absolute pressure is detected using a four active arm strain gauge bridge sensor, fused to a high-purity ceramic diaphragm. Available in three classes of accuracy and compensation specified below, with ranges from 100mbar to 600 bar or scaled to customer requirements.
Sensit Trident Series Submersible Level/Depth Transmitter
The Sensit Trident Series Level/Depth Transmitter is a temperature compensated pressure transmitter designed for the measurement of liquid level in many applications, such as pump testing, reservoir, borehole, river and tank levels. The unit is of welded construction and is ideal for even the most onerous of applications.
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.
Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
Sensit HPS - C Series Passive mV Output Pressure Transducer
Four wire, ratiometric, passive mV output transducers offering superb chemical and corrosion resistance. Gauge or Absolute pressure is detected using a four active arm strain gauge bridge sensor, fused to a high-purity ceramic diaphragm. Available in three classes of accuracy and stability specified below, with ranges from 100mbar to 600 bar or scaled to customer requirements.- Stainless Steel housing
- Rugged construction
- Excellent linearity
- Excellent long term stability
- Wide temperature range
Sensit HPS-A Series 4-20mA Output Pressure Transmitter
Two wire, 4-20mA output transmitters offering superb chemical and corrosion resistance. Gauge or Absolute pressure is detected using a four active arm strain gauge bridge sensor, fused to a high-purity ceramic diaphragm. Available in three classes of accuracy and compensation specified below, with ranges from 100mbar to 600 bar or scaled to customer requirements.- Stainless Steel housing
- Rugged construction
- Excellent linearity
- Excellent long term stability
- Wide temperature range
- Intrinsically safe versions available
Sensit Trident Series Submersible Level/Depth Transmitter
The Sensit Trident Series Level/Depth Transmitter is a temperature compensated pressure transmitter designed for the measurement of liquid level in many applications, such as pump testing, reservoir, borehole, river and tank levels. The unit is of welded construction and is ideal for even the most onerous of applications.- Lightning protection as standard
- Superb chemical and corrosion resistance
- Excellent linearity
- Wide operational & compensated temperature range
- Rugged construction
- Excellent long term stability
- CE Compliant
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
