Service & Support
Can we help?
Measurement Systems offers a full range of tailored service contracts to give peace of mind to our clients.
From simple telephone support, through extended warranty, to full calibration and maintenance contracts covering entire sites; there is a support package for everyone.
We also provide bespoke system training at client sites covering equipment introduction for management, through to detailed level training aimed at engineers, health physics and maintenance teams.
Measurement Systems has a team of engineers with the expertise and experience to ensure that you fully benefit from our service, calibration and repair facilities; and this is not limited to RM&C supplied products.
With two offices locations in the UK, we are able to provide a fast, effective response regardless of your location.
Recommended Products
Calibration & Test Rigs
RM&C Measurement Systems have designed bespoke Calibration and Test Rigs/Equipment for a number of clients.
One key example:
At AWE there are dozens of statutory sampling systems spread across the site, spanning many different facilities. The health physics, calibration and maintenance support for these systems comes from a variety of sources, some centralized and others facility based. To ensure consistency of service, AWE invested in a Test and Training Sampling System that could be used to train support staff across site.
While not being used for training, the client wanted to be able to test different ventilation duct configurations to gain a better understanding of how Sampling Systems would perform in new or modified ventilation installations.
Measurement Systems provided a solution that comprised a full site standard particulate sampling system and a flexible extract duct section coupled to a fan and variable speed drive set-up.
The duct was made-up of a number of differing length section and interchangeable extract ventilation features, such as dampers, flow straightener, Isokinetic Sample Probe section with a clear viewing window and a set of Isokinetic Sample Nozzles. An injection point was added to the fan inlet which allows particulate/smoke injections and the clear window provides visual feedback as to the profile around the Isokinetic Sample Nozzle.
Another key example:
Another issue in the nuclear industry is the calibration of flow meters and other instrumentation installed into systems where potential contamination is present. In these situations the instruments cannot be simply sent back to the manufacturers or calibration laboratory. Measurement Systems has provided many calibrations rigs to overcome this and other site based problems experienced by our clients. The photograph below shows the inside of a Variable Area (VA) flow meter calibration rig. Able to provide a variety of flows and employing mass flow technology, the rig allows our client to annually calibrate their VA flow meters to nationally traceable standards.
Filter Holders
RM&C Measurement Systems can provide a variety of industry standard and bespoke Filter Holders to suit any application, either from our own range or from that of our partner companies, such as Cougar Engineering, manufacturer of the Bird & Tole range of filtration products.
A full range of spares and consumables are also available.
Sampling & Monitoring Systems
For almost two decades our core business has been supplying and supporting Environmental Air Sampling and Monitoring Systems to the nuclear industry. With fully security cleared staff (up to DV) and radiological classified staff, we have engineered solutions that have been adopted as the standard by several nuclear licensees.
At both AWE and Dounreay, where unparalleled performance and reliability are pre-requisites, RM&C Measurement Systems designed solutions have been adopted as the site standard.
Measurement Systems provide support to their customers in meeting their site license conditions and environmental obligations by supplying not only sampling systems, but also a number of related services. These include; project management, process and equipment surveys, discharge flow-rate measurements, system commissioning, instrument calibration, characterisation/verification studies and user training.
Selected by DSRL as the preferred supplier of sampling systems during an evaluation of their existing arrangements, over thirty-five sampling systems have now been successfully accepted by the regulating body for statutory use.
As a supplier of sampling systems, instrumentation and services to AWE for over almost two decades, Measurement Systems recognise that high standards of integrity; professionalism, co-operation, courtesy, competence and efficiency are the platform for excellent client relationships.
Our policy is to work closely with our clients and our mission statement is simple, "for RM&C Measurement Systems to establish itself as the supplier of choice for Sampling Systems, related equipment and services to the UK nuclear industry".
Over and above the sampling or monitoring system, we can provide alarm panels and integration solutions that allow interfacing with existing DCS or SCADA systems.
We always look for the best technical and commercial solution and recently saved EDF Energy around £1m by upgrading rather than replacing their current sampling systems. Click here to view news item
Whatever you’re sampling or monitoring needs, RM&C Measurement Systems can provide a solution.
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.
Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
Calibration & Test Rigs
RM&C Measurement Systems have designed bespoke Calibration and Test Rigs/Equipment for a number of clients.One key example:
At AWE there are dozens of statutory sampling systems spread across the site, spanning many different facilities. The health physics, calibration and maintenance support for these systems comes from a variety of sources, some centralized and others facility based. To ensure consistency of service, AWE invested in a Test and Training Sampling System that could be used to train support staff across site.
While not being used for training, the client wanted to be able to test different ventilation duct configurations to gain a better understanding of how Sampling Systems would perform in new or modified ventilation installations.
Measurement Systems provided a solution that comprised a full site standard particulate sampling system and a flexible extract duct section coupled to a fan and variable speed drive set-up.
The duct was made-up of a number of differing length section and interchangeable extract ventilation features, such as dampers, flow straightener, Isokinetic Sample Probe section with a clear viewing window and a set of Isokinetic Sample Nozzles. An injection point was added to the fan inlet which allows particulate/smoke injections and the clear window provides visual feedback as to the profile around the Isokinetic Sample Nozzle.
Another key example:
Another issue in the nuclear industry is the calibration of flow meters and other instrumentation installed into systems where potential contamination is present. In these situations the instruments cannot be simply sent back to the manufacturers or calibration laboratory. Measurement Systems has provided many calibrations rigs to overcome this and other site based problems experienced by our clients. The photograph below shows the inside of a Variable Area (VA) flow meter calibration rig. Able to provide a variety of flows and employing mass flow technology, the rig allows our client to annually calibrate their VA flow meters to nationally traceable standards.
Filter Holders
RM&C Measurement Systems can provide a variety of industry standard and bespoke Filter Holders to suit any application, either from our own range or from that of our partner companies, such as Cougar Engineering, manufacturer of the Bird & Tole range of filtration products.A full range of spares and consumables are also available.
Sampling & Monitoring Systems
For almost two decades our core business has been supplying and supporting Environmental Air Sampling and Monitoring Systems to the nuclear industry. With fully security cleared staff (up to DV) and radiological classified staff, we have engineered solutions that have been adopted as the standard by several nuclear licensees.At both AWE and Dounreay, where unparalleled performance and reliability are pre-requisites, RM&C Measurement Systems designed solutions have been adopted as the site standard.
Measurement Systems provide support to their customers in meeting their site license conditions and environmental obligations by supplying not only sampling systems, but also a number of related services. These include; project management, process and equipment surveys, discharge flow-rate measurements, system commissioning, instrument calibration, characterisation/verification studies and user training.
Selected by DSRL as the preferred supplier of sampling systems during an evaluation of their existing arrangements, over thirty-five sampling systems have now been successfully accepted by the regulating body for statutory use.
As a supplier of sampling systems, instrumentation and services to AWE for over almost two decades, Measurement Systems recognise that high standards of integrity; professionalism, co-operation, courtesy, competence and efficiency are the platform for excellent client relationships.
Our policy is to work closely with our clients and our mission statement is simple, "for RM&C Measurement Systems to establish itself as the supplier of choice for Sampling Systems, related equipment and services to the UK nuclear industry".
Over and above the sampling or monitoring system, we can provide alarm panels and integration solutions that allow interfacing with existing DCS or SCADA systems.
We always look for the best technical and commercial solution and recently saved EDF Energy around £1m by upgrading rather than replacing their current sampling systems. Click here to view news item
Whatever you’re sampling or monitoring needs, RM&C Measurement Systems can provide a solution.
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
