Ultrasonic Flowmeter
Can we help?
Additionally, the Model 150 offers optional functions for heat quantity and concentration measurement with process input, output and serial communication options available. These features are complemented by an optional internal datalogger and software for the recording and download of measured values. Thanks to its intuitive instrument menu, Setup Wizard, and Audiable Sensor Positioning Assistant™ the flowmeter can be set up and its sensors correctly installed in a matter of minutes. Optional transmitter and transducer versions are available for installation in hazardous areas.
- Lockable and sturdy IP 67 transmitter enclosure with keypad and multifunctional display
- Bi-directional measurement with totalizer function and process input, output and serial communication options including Modbus and HART
- Available with optional Heat Quantity Measurement function and PT100 clamp-on sensors for contactless metering of thermal energy consumption
- Optional Sound Velocity Measurement and output function for contactless product recognition and interface detection
- Transmitter and transducer options approved for use in hazardous areas Zone 1 or 2
- KATdata+ software for offline/online data transfer via RS 232 or USB cable
- AC, DC, battery and solar panel power supply options available
Full Product Specification
| PERFORMANCE | |
| Measurement Principle | Ultrasonic transit-time difference correlation |
| Flow Velocity Range | 0.01-25 m/s |
| Resolution | 0.25 mm/s |
| Repeatability | 0.15% of measured value ±0.015 m/s |
| Volume Flow Accuracy | ±1-3% of measured value depending on application ±0.5% of measured value with process calibration |
| Flow Velocity Accuracy (mean) | ±0.5% of measured value |
| Turndown Ratio | 1:100 |
| Measurement Rate | 10-1,000 s-¹ |
| Response Time | 1 s, 70 ms (optional) |
| Damping of Displayed Value | 0-99 s |
| Gaseous and Solid Content of Liquid Media | <10% of volume |
| GENERAL | |
| Enclosure Type | Wall mounted |
| Degree of Protection | IP 66 according to EN 60529 |
| Operating Temperature | -10 to 60ºC (14 to 140ºF) |
| Housing Material | Plastic, ABS, polycarbonate (transparent front door) |
| Measurement Channels | 1 or 2 |
| Calculation Functions | Average, difference, sum, highest (dual-channel use only) |
| Power Supply | 100-240V AC 50/60 Hz, 9-36V DC |
| Display | LCD graphic display, 128 x 64 dots, backlit |
| Dimensions | 237 x 258 x 146 mm (H x W x D) |
| Weight | 2.3 kg (approximately) |
| Power Consumption | <5 W |
| Operating Languages | English, German, French, Spanish, Russian |
HAZARDOUS AREA TRANSMITTER ENCLOSURE
| Enclosure Type | Wall mounted (additional to Model 150 transmitter) |
| Degree of Protection | IP 66 according to EN 60529 |
| Operating Temperature | -20 to 40ºC (-4 to 104ºF) |
| Housing Material | Grade LM6 cast alloy |
| Finish | RAL 7035 epoxy powder coat |
| Dimensions | 358 x 278 x 268 mm (H x W x D) |
| Weight | 20 kg (with Model 150 transmitter) |
| Ex Certification Code | Ex II 2 GD Ex-d IIB+ T4/T5/T6 IP65/66/67 |
| Ex Certification Number | CESI 01 ATEX 027 |
Recommended Products
Digital / Analogue Liquid Flowmeters and Controllers
Volumetric Liquid Flowmeters
The L series volumetric liquid flowmeter is a laminar flow liquid meter. Differential pressure, fluid pressure and temperature are measured in the laminar flow channel. This information is then used to calculate the volumetric flow rate of the liquid.
The LC series liquid flow controller utilises a proportional valve coupled to a flow meter body creating a unique closed-loop flow controller system. The integral PID controller positions the valve according to the flow set points. These devices accept a selectable analogue or digital control signal from either external devices or locally. The LC series can be configured for single or dual output voltages and/or process signals such as flow and temperture or pressure.
Digital / Analogue Mass Gas Flowmeter
M Series
The M series mass flowmeter was designed to be used as a stand-alone device. With the native display, a user can easily change the configuration of the meter without the need for computers, complicated software or scripts. The M series mass flowmeter also measures pressure, temperature and volumetric flow in addition to mass flow.
MS Series - Aggressive Gases
The MS series of 316L Stainless Steel aggresive gas compatible mass flowmeters retain the same functionality as well as fit and finish of the standard M series mass flowmeters.
The MS series is built from 316L Stainless Steel and uses encapsulated 316L Stainless Steel sensors in the flow path. A variety of sealing material are available, including FFKM, EPDM, Viton, Buna-n, etc. depending upon your application and needs.
FEATURES
Portable Clamp-On Ultrasonic Flowmeter
The Model 230 is a portable dual-channel ultrasonic flowmeter for non-invasive and nonintrusive flow measurement of liquids and liquefied gases in fully filled pipes. It is supplied with an internal datalogger and software for the recording and download of measured values. Additionally, it can be equipped with an integrated wall thickness gauge. Thanks to its intuitive instrument menu, Setup Wizard and Audible Sensor Positioning Assistant™, the flowmeter can be set up and its sensors correctly installed in a matter of minutes. Its two flow channels enable the Model 230 to monitor the flow on two pipes simultaneously or alternatively on one single pipe in a multi-path sensor mounting configuration. Equipped with the optional Heat Quantity Measurement function and PT100 sensors, the instrument can further be employed as a portable heat meter. Measured values can also be transferred by optional process outputs.
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.
Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
Digital / Analogue Liquid Flowmeters and Controllers
Volumetric Liquid FlowmetersThe L series volumetric liquid flowmeter is a laminar flow liquid meter. Differential pressure, fluid pressure and temperature are measured in the laminar flow channel. This information is then used to calculate the volumetric flow rate of the liquid.
- Flow range of 0.5 cm³/min to 10 L/min
- Turndown ratio of 50:1
- Push button interface
- Accuracy of ±2% of full scale rating
- With optional battery pack, device becomes fully portable
- RS232 or RS485 interface
The LC series liquid flow controller utilises a proportional valve coupled to a flow meter body creating a unique closed-loop flow controller system. The integral PID controller positions the valve according to the flow set points. These devices accept a selectable analogue or digital control signal from either external devices or locally. The LC series can be configured for single or dual output voltages and/or process signals such as flow and temperture or pressure.
- Flow range of 1 to 500 cm³/min
- Push button interface
- Accuracy of ±2% of full scale rating
- RS232 interface
Digital / Analogue Mass Gas Flowmeter
M SeriesThe M series mass flowmeter was designed to be used as a stand-alone device. With the native display, a user can easily change the configuration of the meter without the need for computers, complicated software or scripts. The M series mass flowmeter also measures pressure, temperature and volumetric flow in addition to mass flow.
MS Series - Aggressive Gases
The MS series of 316L Stainless Steel aggresive gas compatible mass flowmeters retain the same functionality as well as fit and finish of the standard M series mass flowmeters.
The MS series is built from 316L Stainless Steel and uses encapsulated 316L Stainless Steel sensors in the flow path. A variety of sealing material are available, including FFKM, EPDM, Viton, Buna-n, etc. depending upon your application and needs.
FEATURES
- Response time of 10 milliseconds (adjustable)
- Turndown ration of 100:1
- Push button interface
- Accuracy of ±0.8% of reading + 0.2% of full scale
- 30 standard gas calibration included
- Mass flow
- Volumetric flow
- Pressure (psia)
- Temperature (ºC)
Portable Clamp-On Ultrasonic Flowmeter
The Model 230 is a portable dual-channel ultrasonic flowmeter for non-invasive and nonintrusive flow measurement of liquids and liquefied gases in fully filled pipes. It is supplied with an internal datalogger and software for the recording and download of measured values. Additionally, it can be equipped with an integrated wall thickness gauge. Thanks to its intuitive instrument menu, Setup Wizard and Audible Sensor Positioning Assistant™, the flowmeter can be set up and its sensors correctly installed in a matter of minutes. Its two flow channels enable the Model 230 to monitor the flow on two pipes simultaneously or alternatively on one single pipe in a multi-path sensor mounting configuration. Equipped with the optional Heat Quantity Measurement function and PT100 sensors, the instrument can further be employed as a portable heat meter. Measured values can also be transferred by optional process outputs.- Optional Heat Quantity Measurement function turning flow meter into portable heat meter
- Powered by 8 x AA rechargeable internal batteries for up to 24 hours
- Auto-detected ultrasonic clamp-on sensors and optional intergrated wall thickness gauge
- Graphic LCD display, diagnostic and maths functions for dual-channel measurements
- Available with crush-proof IP 67 case or lightweight soft case holding all necessary accessories including clamp-on chains, clips and accoustic coupling paste
- Mains and internal battery power supply, optional external battery pack available for long-term measurements (up to 21 days)
- Bi-directional measurement with totaliser function
UKAS and Traceable Calibration
Roxspur Measurement & Control Ltd is an ISO 9001:2008 company, we offer UKAS and traceable calibration under BS/EN ISO17025 accredited procedures. Our certificate generation systems are purposely geared to meet the strict and specific requirement of the Aerospace industry.Calibration
Based at our factory in Sheffield our accredited laboratories are available to provide either on-site or in-house calibration to either UKAS or national standards. We cover Temperature (up to 2,200ºC), Pressure (up to 1,200 bar), Flow (up to 2,500 L/min) and Electrical parameters and provide certification using the latest technology.
Our team of experienced on-site engineers hold accreditation for the on-site calibration of equipment including autoclaves, furnaces, thermocouples and probes, scales and balances, ovens and chambers, indicators and controllers, pressure and electrical. We cover the full spectrum of industry sectors. All calibration standards used meet the requirements of Table 3 of AMS 2750D, whether in the laboratory or on site, ensuring full compliance with the specification. To find out more about our on-site services please click here.
We supply thermocouples calibrated and certified to meet the requirements of Table 1 of AMS 2750D appropriate to customer specified usage.
Aerospace Heat Treatment Specialists
From the supply of a single thermocouple to fully managed service contracts, by working in partnership with our customers we can assist in obtaining and maintaining NADCAP approval. To find out more about our specialist aerospace services please click here.
Certification
Certificates generated are designed to meet the requirements of AMS 2750D with the option of UKAS certificates for added peace of mind.
