Products
Products > Flow > Plastic VA Flowmeters > PG Plastic VA Flowmeter - Air
Variable area flowmeters for higher flowrates in 1/2" and 1" pipes, using plastic TPX tubes and Stainless steel or Dural floats. Light open construction with good float visibility. |  |
| Specification | |
| Max Flow Rate | 100 L/min |
| Operating Temperature | 80.00 șC |
| Operating Pressure | 10 BarG |
| Tube | TPX plastic |
| Scale | Black, moulded onto plastic tube |
| Float | Duraluminium |
| Housing | White polyester coated mild steel |
| O-ring Seals | Nitrile with Brass, Viton with Stainless steel |
| Accuracy | ± 5% FSD (Air and Water calibrations) |
| Dimensions | 1/2": 219 x 48 x 48 1": 250 x 67 x 67 |
| Installation | Install tube vertically with flow upwards and read top edge of float |
| Connections | 1/2" & 1" BSP female plated Brass or Stainless steel |
| Available Models | ||
| Flow Range | Connection | Code |
| 10-100 L/min | 1/2" Brass | PGB1 |
| 20-180 L/min | 1/2" Brass | PGB2 |
| 40-440 L/min | 1" Brass | PGB3 |
| 10-100 L/min | 1/2" St. Steel | PGS1 |
| 20-180 L/min | 1/2" St. Steel | PGS2 |
| 40-440 L/min | 1" St. Steel | PGS3 |