Products
Products > Flow > Primary Elements - Orifice Plates and Pitot Tubes > Platon In-line Pitot Pipe Section
Stainless steel pipe sections with welded-in pitot probes, available for 1/2” to 2” pipes. Supplied fitted with 1/4" ball valves to provide process isolation. Alternatively, ‘In-line’ flobars can be manufactured to suit your application. Options available include: Flanged, threaded or weld prepared connection, other pipe schedules and sizes, needle valve isolators or manifolds. Contact sales for more information. |  |
| Specification | |
| Operating Temperature | -20-225 ºC |
| Operating Pressure | 30.00 BarG |
| Pipe size | 50.00 mm |
| Accuracy | 1.00 % |
| Material | St. Steel |
| Repeatability | 1% (typical) |
| Power supply | Not required |
| Output | DP (proportional to the square of fluid velocity) |
| Flow Range | 0.7 to 250 m3/Hr (air @ ATP), 0.1 to 65 m3/Hr (water @ 20°C) |
| Tappings | 1/4" BSP |
| Pipe Connection | Threaded NPT |
| Pipe Size | 1/2" to 2" nominal bore Sch 80 |