Products
Products > Flow > Flow Switches > Adjustable Liquid Flow Switch
Using a spring loaded variable orifice flow meter technique, the sensor can be installed at any angle and can operate at high pressures and temperatures. The moving element trips an external reed sensor, which itself can be adjusted along a flow scale. |  |
| Specification | |
| Flow Rate | 0.4-40.0 L/min |
| Operating Temperature | 120.00 ºC |
| Operating Pressure | 200 BarG |
| Connections | 1/4"-1" BSP |
| Body | Brass or Stainless Steel |
| Seals | Buna N (Brass body) or Viton (Stainless Steel body) |
| Cable | 2.5m long IP65 Termination |
| Output | SPC0 250V AC 80 VA Max |
| Pressure Drop | 0.5 Bar at max flow |
| Length | MR8-20 108mm, MR25 135mm |
| Available Models | ||||
| Max Flow Rate | Adjustable Flow Range | Connection | Body Material | Code |
| 0.4-4.0 L/min | 20 L/min | 1/4" BSP | Brass | MR8MI |
| 0.4-4.0 L/min | 25 L/min | 3/8" BSP | Brass | MR10MI |
| 1.0-10.0 L/min | 40 L/min | 1/2" BSP | Brass | MR15MI |
| 5.0-20.0 L/min | 60 L/min | 3/4" BSP | Brass | MR20MI |
| 10.0-40.0 L/min | 80 L/min | 1" BSP | Brass | MR25MI |
| 0.4-4.0 L/min | 20 L/min | 1/4" BSP | St. Steel | MR8KI |
| 1.0-10.0 L/min | 40 L/min | 1/2" BSP | St. Steel | MR15KI |
| 10.0-40.0 L/min | 80 L/min | 1" BSP | St. Steel | MR25KI |