Products
Products > Pressure > Regulators > Electronic I/P Converter
These electro-mechanical instruments are designed to convert electrical current to a pneumatic output. The converter is based upon the well proven electro-magnetic force balance technique for consistent and reliable performance. Model 100X is designed for low pressure and model 101X is suitable for high pressure applications. Both are suitable for control room or fieldmounting. Note: 100X is also available approved to EEX ia IIC T4, please consult Sales. |  |
| Specification | |
| Accuracy | ± 1% |
| Response Time | 1 Second typical |
| Temperature | -10 to 60°C |
| Protection | IP54 |
| Flow capacity | 300 L/min (10scfm) |
| Connections | 1/4 ” NPT |
| Available Models | ||||||
| Pressure (in) | Pressure (out) | Consumption | Input Signal | Linearity error | Hysteresis | Code |
| 1.4 - 4.5 Bar (20-80 psig) | 0.2-1 Bar (3-15 psig) | 0.85 L/min (0.03 scfm) | 4-20mA | 0.5% | 0.35% | 100X |
| 10 Bar (150 psig) max | 0.14-8 Bar (2-120 psig) | 1.75 L/min (0.06 scfm) | 0-60mA | 1% | 0.5% | 101X |