Products
Products > Pressure > Sensit Slurry Transmitter
The P6420 is a pressure transducer having a two wire, 4 - 20mA output. It is available in standard ranges from 5 bar to 100 bar SG, or may be scaled to customer requirements. The P6420 pressure transducer is based on a four active arm strain gauge bridge fused to a high purity ceramic diaphragm, offering high natural output coupled with superb chemical and corrosion resistance. It has been designed primarily for use with concrete slurry and other abrasive fluids and has a cavity free, flush sensing diaphragm covered by a flexible polypropylene shield. It offers a two wire, 4 - 20mA output proportional to fluid pressure with other outputs available as options. The sensing element and its associated electronics are housed in a rugged stainless steel case. |  |
FEATURES
APPLICATIONS
|  |
| Specification | |
| Pressure Ranges | 5,10, 20, 50 & 100 bar SG and G |
| Excitation | 10-32Vdc unregulated |
| Output Span | 16mA±1% at rated pressure |
| Output Zero | 4mA±1% of span at zero pressure |
| Non Linearity, Hysteresis & Repeatability (NLH) | <±1.00% / span (best fit straight line) |
| Operating Temp Range | -25șC to +100șC |
| Safe Over-range | 1.5 x rated range minimum |
| Burst Pressure | 3 x rated range minimum |
| Insulation/Isolation Resistance | >500 Megaohms at 500Vdc over the operable temperature range |
| Load Driving | 1 Kilo-ohms @ 28Vdc supply |
| Environmental Protection | IP68 to 10bar |
| Electrical Connection | Armoured Cable |