Products
Products > Pumps > Series 2000 Utility Pump
These small, flexible impeller pumps will self-prime and handle hard or soft solids. The impeller is available in Nitrile for oil based products and Neoprene for water based products. Series 2000 are fitted with standard IEC motors, IP54 protected, and a carrying handle.
|  |
| Specification | |
| Pump body | Bronze (Stainless steel or phenolic available upon request) |
| Impeller | Neoprene or Nitrile (Viton and EPDM available upon request) |
| Temperature range | Neoprene impeller 4 - 80°C; Nitrile impeller 10 - 90°C |
| Motor | Single phase, 230V, 50Hz, or 110V |
| Connections | 1" BSP female (2003, 2021, 2103) or 3/8" BSP female (2051, 2053) |
| Self-priming | Up to 4m (2003, 2021, 2103) or up to 2m (2051, 2053) |
| Dry running | Acceptable with 2003, 2021 and 2103. |
| Available Models | ||||||
| Max Flow Rate | Impeller Material | Max Solid Size | Pump Head | Motor Voltage | Code | |
| 6 L/min | Neoprene | 2mm | 30 | 230V AC | 48102544-2051 | |
| 6 L/min | Nitrile | 2mm | 22 | 230V AC | 48102545-2053 | |
| 30 L/min | Nitrile | 6mm | 15 | 230V AC | 48102541-2003 | |
| 30 L/min | Neoprene | 6mm | 30 | 230V AC | 48102542-2021 | |
| 30 L/min | Nitrile | 6mm | 15 | 110V AC | 48102543-2103 | |