HART Universal Mount Transmitter

Roxspur Measurement and Control: For Good Measure

Home

Products & Services

Recorders & Dataloggers

Controllers & Displays

Valves

Pumps and Specialist Solutions

+ Terms and Conditions

Search roxspur.com

Products

Products > Temperature > Temperature Measurement > Temperature Signal Conditioning > HART Universal Head Mount Temperature Transmitter

The GEN 310 is an encapsulated in-head temperature transmitter with an integral spring mounting kit that replaces the standard connecting block in the sensor head. It is small in size yet has a performance superior to other larger and more expensive transmitters.

The GEN 310 has full HART‚ communications protocol which allows the user to quickly and easily down-load information or interrogate the device enabling the following:

Simple re-ranging of sensor type and range
Easy on site re-calibration
Self documentation
Operation with proprietary software packages such as AMS Plant WebTM and CornerstoneTM
Remote configuration on the 4-20mA loop with a hand held communicator or with PC & HART‚ modem.
Online Digital communication concurrent with a 4-20mA Analogue signal.

All the standard HART‚ universal and common usage commands are fully implemented, with other device specific commands that enable access to the enhanced performance parameters of the GEN 310.

Specification
Sensor	Pt100 to BSEN6075
Sensor Range	-200 to 850°C
Minimum Span	25°C
Linearisation	BSEN60751/BS1904/DIN 43760/JISC 1604
Accuracy	± 0.01% Full Range Input, ± 0.05% Rdg
Excitation Current	300mA to 550mA
Maximum Lead Resistance	50 ohms/leg
Thermocouple Type	TC type K: -200 to 1370 TC type J: -200 to 1200 TC type T: -210 to 400 TC type R: -10 to 1760 TC type S: -10 to 1760 TC type E: -200 to 1000 TC type F (L): -100 to 600 TC type N: -180 to 1300
Sensor	T/C
Accuracy	±0.04% FRI ±0.04% Rdg or 0.5°C (whichever is greater)
Cold Junction Error	±0.5°C
Cold Junction Tracking	0.05°C/°C
Cold Junctione	-40 to 85°C
Input	Voltage Source
Range	-10 to +75mV
Characterisation	Linear
Minimum Span	5mV
Accuracy	±10mV plus ±0.07% rdg
Sensor	3 wire potentiometer (slidewire)
Resistance Range	10 ohms to 390 ohms (End to End)
Characterisation	Linear
Minimum Span	5%
Accuracy	0.1%
Output	4-20mA loop powered, max. 25mA
Loop Supply	10 to 35V polarity protected
Loop Resistance	660 ohms max. @ 24V, 250 ohms min
Input/Output Isolation	500 V AC rms
Filter Factor	Programmable Off, 1 to 32 seconds or Adaptive
Ambient Operating Temp	-40 to 85°C
Ambient Storage Temp	-50 to 100°C